Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 15)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
3-1
3.1 Intended use
3 Safety
33000 Safety Safety 3- 3.1 Intended use 3100 Intended use 3- ][BA_Sicherheit_Bestimmung_FS
The safety card PMCprotego S1 is an expansion of the servo amplifier
PMCprotego D. It is designed for use in safety-related applications.
Sicherheit_Bestimm_prot_S
It meets the requirements for safety functions in accordance with
EN 61800-5-2, with regard to safe motion monitoring.
Sicherheit_Impulssperre_S1
The safety card meets the requirements of EN IEC 61508 up to SIL 3
and EN ISO 13849-1 up to PL e.
To achieve category SIL 3 or PL e, the operator must ensure that the
function of the safe pulse disabler is tested periodically, after 8 hours at
the latest, by triggering safety functions SS1 or STO:
 By restarting after safety functions SS1 or STO have been triggered
as a condition of operation
or
 By restarting after safety function SS1 has been triggered by the op-
erator
Sicherheit_Impulssperre_Info
Sicherheit_Bestimmung_Ausschluss_S1_S2
The following is deemed improper use:
 Any component, technical or electrical modification to the servo am-
plifier
 Use of the servo amplifier outside the areas described in this manual
 Use of the servo amplifier outside the documented technical details
(see chapter entitled “Technical Details”)
Intended use includes making the installation and wiring EMC-compli-
ant.
Sicherheit_Bestimm_Dokumente
Intended use also includes compliance with the
 Operating manual for the PMCprotego D
 Online help for the configuration tool PASconfig SDrive.
Sicherheit_Bestimm_Produkte
INFORMATION
To test the safe pulse disabler through deliberate operator
action, see the section entitled "Operation", under "Testing the
safe pulse disabler".