Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 92)

8.4 Messages
8 Operation
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
8-6
8.4 Messages 8400 Messages 8- Betrieb_Fehlermeldungen
Any errors on the safety card are indicated on the servo amplifier display
with message "F31".
The following options are available for detailed diagnostics and fault de-
tection:
 LEDs on the front of the safety card provide information on operating
states (see section on "Display elements" in this chapter).
 Outputs on the safety card display the state of the safety functions
(e.g. STO Acknowledge).
 Errors and messages are entered in the safety card's error stack.
 The following are displayed in online mode in the Configurator PAS-
config SDrive:
– Safety card status messages and error messages (error stack)
– States of safety card inputs and outputs
– Errors and states of inputs and outputs on the motion control sys-
tem
See also "Servo amplifier configuration software"
 Errors, messages and the corresponding remedies are displayed in
the expanded diagnostics system PVIS.