Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 58)

4.6 Configuration
4 Function Description
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
4-40
4.6 Configuration 4600 Configuration 4- Funkt_Konfiguration
The safety functions to be carried out by the safety card are defined in
the safety card's configurator:
 Configuration of the safety functions
 Setting of limit values, braking ramps for the safety functions, moni-
toring of motion sequences
Download configuration:
 On single-axis systems, via the RS 232 interface on the servo ampli-
fier
 On networked systems, via the RS 232 or Ethernet interface on the
motion control system. The control system passes the configuration
to the respective safety card.
Download configuration to safety card:
 Online from configurator to safety card.
 Save configuration to external SD card.
 Order and serial numbers must be entered in the configuration to en-
sure the safety card is addressed securely.
 The feasibility of the configuration is checked as it is downloaded.
 Enabling of the power element after download depends on the status
of the inputs on the safety card.
Upload configuration from safety card:
 Online from safety card to configurator
 Save safety card configuration to SD card in the servo amplifier.
 The feasibility of the configuration is checked as it is uploaded.
INFORMATION
Further information on the configuration and parameter settings
for the safety functions is available in the safety card configura-
tor's online help.