Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 61)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
5-3
5.3 Installing the safety card
5 Installation
5.3 Installing the safety card 5300 Installing the safety card 5- Montage_S1
The expansion card is installed in slot 3 of the servo amplifier. When in-
stalling, please note the guidelines given under "Installation" in the op-
erating manual for the servo amplifier.
1.Remove the film. 2. Break the middle link
3. Break the top link and lever out the
cover plate
4. Using suitable pliers, pull out the blank in the safety card plug
5. Plug in the safety card and tighten
the screws