Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 76)

7.2 Initial commissioning
7 Commissioning
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
7-4
 SS1 Activate: Input for safety function SS1
 SS1 SIL3/Reset: Input for SIL3 and reset
 STO Acknowledge: Output for feedback from safety function STO
 Ready: Output for operating status of the safety card
 "CONFIG" LED: Configuration data is downloaded
 “RUN” LED: System is ready
 RUN: System is ready for operation
 CONFIG: Downloading the configuration data
 STARTUP: System starts up with the downloaded configuration
The inputs and outputs on the safety card can be tested using
 The dynamic program display in the safety card's Configurator
Inbetrieb_Erstinbetrieb_Zusatz  PDrive and PScope from PMCmotion control tools
SS1 SIL3/Reset
1
0
1
0
1
0
1
0
1
0
SS1 Activate
Ready
STO Acknowledge
1
0
LED "CONFIG"
LED "RUN"
CONFIG STARTUP RUN RUN