Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 60)

8.1 Operating states and changes in operating status
8 Operation
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
8-4
8.1.3 Change in operating status
Change in operating status 8- Betriebszustandswechsel_primo_C
--> All operating states change to "Power Off"
The system changes to "Power Off" operating status when the 24 VDC
supply voltage has been switched off.
--> Change from "Power Off" to "Startup"
The system changes to "Startup" operating status when the 24 VDC
supply voltage has been switched on.
--> Change from "Startup" to "Boot Menu"
The LED lights for 4 s if "Startup" has been run without error.
 Press the reset button during this time to change to "Boot Menu" op-
erating status.
--> Change from "Startup" to "RUN"
"Startup" operating status has been run without error. The system
changes to "RUN" status if a user program was loaded in "Startup" sta-
tus.
--> Change from "Startup" to "STOP"
"Startup" operating status has been run without error. The system
changes to "STOP" status if no user program was loaded in "Startup"
status.
--> Change from "Startup" to "Fatal Error"
The system changes to "Fatal Error" status if an error occurred in "Star-
tup" status.
1
0 1
1 2
1 3
1 4
1 5