Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 35)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
6-3
6.3 Supply voltage
6 Wiring
6.3 Supply voltage 6300 Supply voltage 6- Verdr_Versorgung
The digital outputs and the unit need a 24 VDC supply.
 When selecting the power supply, please refer to the requirements
stated under “Technical Details”.
 The power supply must be able to bridge a power outage of 20 ms.
Verdr_Versorgung_Warnung
Verdr_primo_C_X40_Versorgung
WARNING!
Electric shock!
Safe electrical isolation must be ensured for the external power
supply that generates the supply voltage. Failure to do so could
result in electric shock. The power supplies must comply with
EN 60950-1, 05/2006, EN 61558-2-6, 11/1997.
Connector pin assignment
Connector X40 Pin Designation Description
7 +24 V Supply voltage + 24 VDC
15 0 V Supply Earth for supply voltage
Connection
24 V connection isolated from exter-
nal power supply, e.g. with isolating
transformer
Noise suppression filter integrated
within the unit
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
L3
7
X40
L1
L2
15
+24 V
0 V Supply PE
+24 V