Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 49)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
7-5
7.2 Commissioning the PMCprimo C
7 Commissioning
START
SOFTWARE
Firmware: 3.0.2_T04, Apr 18 2012, 11:11:50
Motion: INSTALLED
IEC PLC: INSTALLED
Interpolation: NOT AVAILABLE
ETHERNET
IP address 192.168.0.11
Netmask 255.255.255.0
Gateway 192.168.0.1
CHANNELS
Number 1...30
HARDWARE
Type: PMCprimo C 0.6GHz 2xCAN
Mat.Nr.: 680055
Ser.Nr.: 111
Pr.Ver.: 1.0
Inputs: 6
Outputs: 6
Virtual-Inputs: 56
Virtual-Outputs: 56
Analogue Inputs: 0
Analogue Outputs: 0
DEVICES in CAN Network:
PMCtendo DD4 (SD03) at CAN2 ADDR 9 found (DS402)
Inputs: 2
Outputs: 0
PMCprotego D (S706) at CAN1 ADDR 10 found (DS402)
Inputs: 5
Outputs: 1
Virtual-Inputs: 17
Virtual-Outputs: 19
Analogue Inputs: 2 inputs linked to channel from 0.1 to 0.2