Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 29)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
5-1
5.1 General requirements
5 Installation
5 5000 Installation Installation 5- 5.1 General requirements 5100 General requirements 5- Montage
Please also refer to the operating manual for the servo amplifier.
Montage_EMV ESD
Montage_Einbau
CAUTION!
Damage due to electrostatic discharge!
Electrostatic discharge can damage components. Ensure
against discharge before touching the product, e.g. by touching
an earthed, conductive surface or by wearing an earthed arm-
band.
NOTICE
The motion controller is installed in the servo amplifier
PMCprotego D. Once installed, the environmental conditions of
the servo amplifier PMCprotego D apply (see "Technical Details"
in the operating manual for the servo amplifier).