Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 24)

4.1 Device properties
4 Function description
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
4-6
4.1.5.3 PROFIBUS DP
PROFIBUS DP 4- Funktion_PROFIBUS
PROFIBUS is an open fieldbus standard. Communication is defined in
IEC 61158 and IEC 61784. Further provisions have been defined in
specifications published by the PROFIBUS User Group. These specifi-
cations are available from PROFIBUS International.
On a certain unit type, the PROFIBUS interface is available together with
a CANopen interface on an RJ45 socket (X42).
Funktion_PROFIBUS_primo_C
Properties:
 The PROFIBUS is configured using the CD command: Slave address,
address range, see PMCprimo Programming Manual.
 A total of up to 108 bus variables can be read and written (see PMCp-
rimo Programming Manual):
– Address space of bus variables: $B1 to $Bx108 (can be set using
the CD command).
– Data width: 16 Bit including sign
– Value range: -32768 to 32767 (Hex: 0x0000 to 0x7FFF).
 When changing the variable content, any programs can be started if
the bus variables have been defined as trigger variables.
PROFIBUS_Hinweis_Nutzerorganisation
4.1.5.4 Ethernet
Ethernet 4- Funktion_Gigabit_Ethernet
The Gigabit Ethernet interface (X43) connects the PMCprimo C to a pro-
gramming device for configuration, programming and commissioning.
The interface can also be used to connect a visualisation device.
The Gigabit Ethernet interface is compatible with 1000Base-T (Standard
Gigabit Ethernet). Data exchange is possible via Modbus TCP/IP.
INFORMATION
The GSD file is available on the supplied CD-ROM. The name of
the description file can be found in the "Technical Details".
INFORMATION
Please also refer to the installation guidelines published by the
PROFIBUS User Group.