Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 17)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
3-3
3.3 Standards
3 Security
3.3 Standards 3300 Standards 3- BA_Sicherheit_Normen
To use the device correctly you will need to have a good knowledge of
the relevant standards and directives. The following standards are rele-
vant:
 EN 61131-1:2003: Programmable controllers – Part 1: General infor-
mation
 EN 61131-2:2003: Programmable controllers – Part 2: Equipment re-
quirements and tests
 EN 61131-3:2003: Programmable controllers – Part 3: Programming
languages
Please note this is not an exhaustive list of safety standards and direc-
tives.