Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 15)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
3-1
3.1 Intended use
3 Security
3 3000 Security Security 3- 3.1 Intended use 3100 Intended use 3- BA_Sicherheit_Bestimmung
The motion controller PMCprimo C is suitable for use in logic and mo-
tion control applications.
Examples of typical application areas for the product are
 Clocked production machinery
 Continuous manufacturing processes (winding, flying saw, cross cut-
ter)
 Machine tools
 Packaging machines
 Pick and place applications
The motion controller is installed in the servo amplifier PMCprotego D.
Once installed, the environmental conditions of the servo amplifier PM-
Cprotego D apply, e.g. the lower storage temperature (see "Technical
Details" in the operating manual for the servo amplifier).
Please note that the PMCprimo C has no internal electrical connection
to the servo amplifier PMCprotego D. When installing and operating the
device, you must refer to the operating manuals for the servo amplifiers,
in particular the safety guidelines.
Bestimmung/Gerätebeschreibung_EMV+Ausschluss
Intended use includes making the electrical installation EMC-compliant.
The product is designed for use in an industrial environment. It is not
suitable for use in a domestic environment, as this can lead to interfer-
ence.
The following is deemed improper use in particular:
 Any component, technical or electrical modification to the product
 Use of the product outside the areas described in this manual
 Use of the product outside the technical details (see chapter entitled
“Technical Details”)