Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 26)

4.1 Device properties
4 Function description
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
4-8
4.1.7 Reset button
Reset button 4- Funktion_Reset_Taster
The "RESET" button is mounted in a recess on the front of the unit. It can
only be accessed using an appropriate tool (e.g. a pin).
The following actions can be triggered by pressing the "RESET" button:
 Change from "Startup" operating status to "Boot Menu"
 Hardware reset (cold start): Change from "RUN" or "STOP" operating
status to "Startup"
 Change from "RUN" operating status to "STOP"
 Change from "STOP" operating status to "RUN"
INFORMATION
Further information on the reset button can be found in the
chapter entitled "Operation".