Echelon i.LON SmartServer 2.0 Power Line - Manual (Page 78)

64 Maintaining a Power Line Repeating Network
9. The LNS Network dialog opens.
10. In the LNS Network property, either select an existing LNS network database to be updated with
the network configuration stored in the SmartServer’s internal database (XML files in the
root/config/network folder on the SmartServer flash disk), or create a new LNS network database.
• To select an existing LNS network database, select the name of the LNS network database
from the list and then click Finish.
• To create a new LNS network database, click the arrow to use the current network name for
the LNS network database or enter a different descriptive name (maximum 14 characters) that
is unique to the selected LNS Server, click Next, and then click Finish in the Create LNS
DB? dialog. The new LNS network database is created in the ilon\db folder on your
computer.
11. If IP-852 routing is licensed on your SmartServer, a dialog appears informing you that you need to
reboot your SmartServer in order to use it as an IP-852 router. Click Close.