Echelon i.LON SmartServer 2.0 Power Line - Manual (Page 137)

i.LON SmartServer 2.0 Power Line Repeating Network Management Guide 123
a. Right-click the LAN icon, point to Add Host, and then click i.LON SmartServer 2.0 on the
shortcut menu.
b. The Setup – Remote i.LON SmartServer 2.0 Web page opens, and a SmartServer node is
added to the tree view below the LAN icon.
c. Enter the SOAP/HTTP properties of the SmartServer attached to the power line repeating
network. See Chapter 3 of the i.LON SmartServer 2.0 User’s Guide for more information on
configuring these properties.
d. Click Submit.
2. From the SmartServer tree on the left frame, right-click a source data point on the local
SmartServer (the SmartServer attached to the FT-10 or PL-20 non-repeating network) and then
click Add Binding in the shortcut menu.