Echelon i.LON SmartServer 2.0 Power Line - Manual (Page 125)

i.LON SmartServer 2.0 Power Line Repeating Network Management Guide 111
1. Click General above the tree view in the left frame of the SmartServer Web interface.
2. Expand the network icon in the SmartServer tree, and then expand the LON channel to show the
i.LON App (Internal) device.
3. Right-click the i.LON App (Internal) device and then select Add Functional Block in the
shortcut menu.
4. The Add Functional Block dialog opens.
5. Select the Type Translator functional block from the Static or Dynamic LonMark folder. The
folder available in the dialog depends on whether the SmartServer is using the static v12 external
interface (XIF) file or the dynamic v40 XIF file.
• If the SmartServer is using the static v12 XIF file (the default), expand the Static icon, select
the Type Translator functiona1 block, optionally enter a different name than the default
programmatic functional block name, and then click OK.