ADLINK PCI-8102 - Manual (Page 43)

32 Signal Connections
The CMP channel is located on P1. The signal names, pin num-
bers, and axis numbers are shown below:
The following wiring diagram is of the CMP on the first 2 axes:
Note: CMP trigger type can be set as normal low (rising
edge) or normal high (falling edge). Default setting is normal
high.
Refer to function_8102_set_trigger_comparator for details.
P1 Pin No Signal Name Axis #
30 CMP0 1
31 CMP1 2
From Motion
ASIC