ADLINK PCI-8102 - Manual (Page 18)

Introduction 7
PCI-8102
X PCI-8102 Dimension (PCB size): 120mm(L) X 100mm(W)
1.3 Supported Software
Programming Library
Windows 2000/XP/7 (32bit/64bit) DLLs are provided for PCI-8102
users. These function libraries are shipped with the board.
MotionCreatorPro
This Windows-based utility is used to setup cards, motors, and
systems. It can also aid in debugging hardware and software prob-
lems. It allows users to set I/O logic parameters to be loaded in
their own program. This product is also bundled with the card.
Refer to Chapter 5 for more details.
1.4 Available Terminal Board
ADLINK provides a variety of specific terminal boards for connec-
tion to individual servos, such as Mitsubishi J2S, J3A, Panasonic
MINAS A4, Yaskawa Sigma II, III and V, as well as a DIN-68S0
board for general purpose usage. Available terminal boards are
available as follows.
PCI-1802
Terminal Board Corresponding
Servo Driver
Board Appearance
DIN-68M-J2A0
Mitsubishi J2S
series
DIN-68M-J3A0
Mitsubishi J3A
series