7 connection example, 1 general description of wiring, 2 wiring with din-68m-j3a – ADLINK PCI-8102 User Manual

Page 194: General description of wiring, Wiring with din-68m-j3a, 7connection example

Text mode
Original mode

Connection Example

183

PCI-8102

Connection Example

This chapter shows some connection examples between the PCI-
8102 and servo drivers and stepping drivers.

7.1

General Description of Wiring

Main connection between the PCI-8102 and the pulse input servo
driver or stepping driver. The following figure illustrates how to
integrate the PCI-8102 and DIN-68M-J3A

7.2

Wiring with DIN-68M-J3A

Notice

: The DIN-68M-J3A is used for wiring between Mitsubishi J3A

series servo drivers / stepper with pulse trains input driver

and ADLINK cPCI-8168, PCI-8102 motion controller card

ONLY. Never use this terminal board with any other servo

driver or cards.