ADLINK PCI-8102 - Manual (Page 23)

12 Installation
2.3.4 Troubleshooting
If your system doesn’t boot or if you experience erratic operation
with your PCI board in place, it’s most likely caused by an interrupt
conflict (possibly an incorrect ISA setup). In general, the solution,
once determined it is not a simple oversight, is to consult the BIOS
documentation that comes with your system.
Check the control panel of the Windows system if the card is listed
by the system. If not, check the PCI settings in the BIOS or use
another PCI slot.
2.4 Software Driver Installation
PCI-8102:
1. Auto run the ADLINK All-In-One CD. Choose Driver
Installation -> Motion Control -> PCI-8102.
2. Follow the procedures of the installer.
3. After setup installation is completed, restart windows.
Suggestion: Please download the latest software from ADLINK
website if necessary.