ADLINK PCI-8102 - Manual (Page 41)

30 Signal Connections
The signal names, pin numbers, and axis numbers are shown in
the table below:
The ERC signal is used to clear the deviation counter of the servo-
motor driver. The ERC output circuit is an open collector with a
maximum of 35V at 50mA driving capacity.
3.9 General-Purpose Signal SVON
The SVON signal can be used as a servomotor-on control or gen-
eral purpose output signal. The signal names, pin numbers, and
its axis numbers are shown as follows:
P1 Pin No Signal Name Axis #
8 ERC0 1
42 ERC1 2
P1 Pin No Signal Name Axis #
7 SVON0 1
41 SVON1 2
Inside 8102 P1