DMP Electronics DMP Command Processor Panel XR500 - Manual (Page 49)

Digital Monitoring Products XR500 Series Canadian Programming Guide
40
STATUS LIST
Status List
15.1
STATUS LIST
Status List
This function allows you to select the zone alarms and troubles, and system monitor
troubles displayed at the keypads. The Status List function operates automatically
when the keypad is not performing any other function.
The keypad stays in the Status List until the user arms or disarms or selects a menu
option. Status List al ternates with the Armed Status on keypad addresses selected
in the Menu Display - Armed Status section. You can choose to have Sys tem Monitor
troubles placed in the list, the differ ent zone types placed in the list, and at which
keypad addresses they dis play.
To select a keypad, enter the device number (keypad address) using the digit keys
on the keypad. When a keypad is selected, an asterisk appears next to the keypad
address. Enter the number again to deselect the keypad. Press the COMMAND key
to display the next set of keypads (9 through 16). Refer to the Multiple Displays
section at the beginning of this document.
15.2
DISPLAY KEYPADS:
Display Keypads
This option defines which keypad ad dresses display the various status information.
Any combina tion of addresses can be en tered to display the status items that follow.
If you do not want a particular status item to dis play, do not enter any ad dresses.
15.3 SYSTEM TROUBLES: System Monitor Troubles
Specifies the keypad addresses (1 through 16) where any trouble on a System Monitor
dis plays. The System Monitors include the following:
• AC Power
• Battery Power
• Closing Check
• Panel Box Tamper
• Phone Line 1
• Phone Line 2 (requires the 893A Dual Phone Line Module)
• Wireless Receiver Trouble
• Wireless Jamming Trouble or Alarm
The System Monitor name is placed in the Status List and the keypad steady trouble
buzzer sounds. The buzzer remains on until any keypad top row Select key is
pressed. The name remains in the list until the condition is re stored. The buzzer
sounds at 10:00 am daily until the system trouble is cleared from the Status List.
15.4 FIRE ZONES: Fire Zones
Specifies the keypad addresses (1 through 16) where all fire zone alarms and troubles
display. The zone name displays and, if it is a trouble condition, the keypad steady
trouble buzzer sounds. The buzzer remains on until any top row Select key is
pressed and a user code is entered. If a trouble condition remains in the display, the
buzzer sounds at 10:00 am daily until the trouble is cleared from the Status List.
When using LCD Keypads, the panel provides distinct speaker tones from the keypad
for Fire:
On - Fire zone alarm and Bell Output or Fire Bell Output is ON.
Off - Alarm Silence