TeeJet Matrix Pro 840GS - Manual (Page 66)

60
www.teejet.com
HOME
OVER
VIE
W
SE
TUP
IMPLEMENT
FULL SCREEN
GPS
INTR
ODUC
TION
GUID
ANCE
DR
OPLE
T MONIT
OR
OEM spreader implement type
1. Select Spreader implement type on implement screen.
2. Press NEXT PAGE arrow .
3. Select from:
►Setup type – used to select
OEM
spreader type
►Antenna to disks – used to enter the distance from the
GPS antenna to the delivery disks or dispersal mechanism.
Range is 0.0 to 50.0 metres.
►Start distance – used to set the start distance when exiting
an applied area. Consult spreader manufacturer for value.
►Stop distance– used to set the stop distance when entering
an applied area. Consult spreader manufacturer for value.
4. Press RETURN arrow to return to the implement screen
or CONFIGURATION side tab to return to the main
configuration screen.
Figure 8-12: Implement setup options in OEM spreader mode