TeeJet Matrix Pro 840GS - Manual (Page 45)

39
98-05273-EN R4
HOME
OVER
VIE
W
SE
TUP
IMPLEMENT
FULL SCREEN
GPS
INTR
ODUC
TION
GUID
ANCE
DR
OPLE
T MONIT
OR
GuidanCe MOdeS
straight Ab guidance
Straight AB guidance provides straight line guidance based on A and B
reference points. The original A and B point are used to calculate all other
parallel guidelines.
NOTE: Offset to adjacent guidelines will be calculated using the guidance
width, which is encoded in Unit setup in the Implement options.
Curved Ab guidance
Curved AB guidance provides guidance along curved lines based on an initial
AB reference line. This initial baseline is used to calculate all other guidelines.
NOTE: Curved guidance is recommended not to exceed 30° within the AB
guideline.
Offset to adjacent guidelines will be calculated using the guidance
width, which is encoded in Unit setup in the Implement options.
HINT: While working in a bounded area, the guidance pattern extending
beyond the established AB points will be straight line guidance.
Circle pivot guidance
Circle pivot guidance provides guidance around a central location that
radiates inward or outward based on an initial AB reference line. This initial
baseline is used to calculate all other guidelines.
It is used for product application in a centre pivot field while being guided
along a circular guideline that matches a centre pivot irrigation system radius.
NOTE: Offset to adjacent guidelines will be calculated using the guidance
width, which is encoded in Unit setup in the Implement options.
Last pass guidance
Last pass guidance offers true last pass navigation. The console will
automatically detect the nearest applied area and establish parallel guideline
based on that area.
NOTE: If a boundary is established but no application occurred during the
boundary process, guidance will not initiate.
NextRow guidance
NextRow Guidance indicates where the NextRow is located and provides
guidance at row ends to the next adjacent row. When the operator marks the
end of the row and begins turning to the next row, a Straight AB guidance line
is provided in the next row. When the vehicle is in the NextRow, guidance is
turned off.
NOTE: Offset to NextRow will be calculated using the guidance width, which
is encoded in Unit setup in the Implement options.
The NextRow guidance does not support skipping rows.
No guidance
No guidance turns off guidance.
NOTE: No guidance mode does not delete established guide lines or points from the console. To delete established/saved
data from the console, please refer to the Data management section under Unit setup.