TeeJet Matrix Pro 840GS - Manual (Page 58)

52
www.teejet.com
HOME
OVER
VIE
W
SE
TUP
IMPLEMENT
FULL SCREEN
GPS
INTR
ODUC
TION
GUID
ANCE
DR
OPLE
T MONIT
OR
CHApTER 7 - Gps
GPS is used to configure GPS type, GPS port and PRN as well as to view GPS status information.
Gps
NOTE: These settings are required for assisted/auto steering
and tilt sensor operation, as well as proper implement
operation.
1. Press CONFIGURATION side tab .
2. Press
GPS
.
3. Select from:
►GPS type – sets to accept GPS source transmissions
►GPS port – sets (D)GPS communication port
►GPS status information – displays information regarding
GGA/VTG (Data Rates), Number of Satellites, HDOP, PRN,
GGA Quality, GPS Receiver, Receiver Version and UTM
Zone
►Program – allows direct programming of the GPS receiver
through a command line interface
►PRN – selects the SBAS PRN that will provide GNSS
differential correction data
►Alternate PRN – when PRN is not automatic, a second
alternate SBAS PRN will provide a second set of GNSS
differential correction data
4. Press RETURN arrow or CONFIGURATION side tab
to return to the main Configuration screen.
Figure 7-1: GPS