beautypg.com

Nextrow guidelines, Azimuth degree, Nextrow guidelines azimuth degree – TeeJet Matrix Pro 840GS User Manual

Page 49: End row, Turn now, Mark a, Enter azimuth (deg)

background image

43

98-05273-EN R4

HOME

OVER

VIE

W

SE

TUP

IMPLEMENT

FULL SCREEN

GPS

INTR

ODUC

TION

GUID

ANCE

DR

OPLE

T MONIT

OR

NextRow guidelines

NextRow guidance indicates where the next row is located

based on the programmed guidance width and provides

guidance at user marked row ends to the next adjacent row.

When the operator signals the end of the row, a Straight AB line

will be established in the current row and guidance is provided to

the NextRow. When the vehicle is in the NextRow, guidance is

turned off.
NOTE: Offset to NextRow will be calculated using the

guidance width, which is established in Unit Setup

under Implement Setup.

To activate NextRow guidelines:

1. Press NAVIGATION AND GUIDANCE OPTIONS tab

to

display navigation options.

2. At the end of a row (while driving a straight line)

press MARK B icon

B

.

◄The end of the row will be marked with a green point .

3. Turn toward the next row.
4. Based on that direction turned, guidance will be provided for

the next adjacent row.
◄When the vehicle is in the row, the guideline is removed

5. Repeat at the end of the next row.
NOTE: The NextRow Guidance feature does not support

skipping rows.

Figure 6-28: Mark end of row

15:22

7.2

km/h

End row

B

15:28

7.2

km/h

Turn now

Azimuth degree

A

An azimuth is defined as a horizontal angle measured

clockwise from a north base line. When using an azimuth,

the point from which the azimuth originates is the centre of an

imaginary circle. This circle is divided into 360°. North = 0,

East = 90, South = 180, West = 270.
An azimuth degree can be entered to determine the exact location

of the vehicle. When a navigation mode is selected, the azimuth

degree can be entered.

To establish an Azimuth degree guideline:

1. Press NAVIGATION AND GUIDANCE OPTIONS tab

to

display navigation options.

2. Press AZIMUTH icon

A

to enter azimuth degree.

3. Use the entry screen to establish the Azimuth degree.
4. Press:

►Accept

to save the settings

►Cancel

to leave the keypad without saving

5. “Would you like to name this guideline?”

Press:
►Yes – to enter a name and save the guideline
►No – to automatically generate a name

The console will begin providing navigation information.
To establish additional azimuth guidelines, follow the same steps

as the initial azimuth guideline.
Figure 6-29: Azimuth guidance

13:12

7.2

km/h

Mark A

A

A

13:14

7.2

km/h

> 0.0 <

enter azimuth (deg)

1

2

3

0

Clear

4

5

6

<--

7

8

9

0

.

+/-

This manual is related to the following products: