TeeJet Matrix Pro 840GS - Manual (Page 46)

40
www.teejet.com
HOME
OVER
VIE
W
SE
TUP
IMPLEMENT
FULL SCREEN
GPS
INTR
ODUC
TION
GUID
ANCE
DR
OPLE
T MONIT
OR
GuidelineS
Curved lookahead indicates what direction the vehicle will
take when steering in any given direction.
AB guidelines, Azimuth guidelines, next pass guidelines and
NextRow guidelines are each available depending on the current
guidance mode. Up to 25 established guidelines can be stored in
the console per job. Switching from one guidance mode to another
will change the current available guidelines.
Multiple guidelines can be created in each guidance mode. If
more than one guideline is saved in a single guidance mode, the
next guideline feature will become available. By pressing the next
guideline option, the vehicle will be directed to the
next guideline saved in the console.
A user can duplicate and edit jobs for reuse of boundaries and
guidelines for different applications over the same field using
Fieldware Link or the Data->Job data->Manage option.
Curved lookahead guideline
The curved lookahead guideline provides an indication of
where the current steering will take the vehicle using a
‘pointer’ as guidance. The Curved lookahead option is available in
all guidance modes.
To activate the Curved lookahead guideline:
1. Press NAVIGATION AND GUIDANCE OPTIONS tab to
display navigation options.
2. Select CURVED LOOKAHEAD icon
The pointer will be visible on the navigation screen.
Figure 6-18: Curved lookahead
-13 7.2
km/h
Mark A
To remove the Curved lookahead guideline:
1. Press NAVIGATION AND GUIDANCE OPTIONS tab to
display navigation options.
2. Select CURVED LOOKAHEAD icon
Marking A and b points
A B
To establish an AB guideline:
1. Drive to the desired location of Point A .
2. Press NAVIGATION AND GUIDANCE OPTIONS tab
to
display navigation options.
3. While the vehicle is in motion, press MARK A icon A .
4. Drive to the desired location of Point B .
5. Press MARK B icon
B to establish the AB line.
6. “Would you like to name this guideline?”
Press:
►Yes – to enter a name and save the guideline in the console
►No – to automatically generate a name and save the
guideline in the console
The console will begin providing navigation information.
NOTE: The MARK B Icon
B is not available for selection (greyed
out) until the minimum distance is travelled (3.0 metres in
Straight or Curved guidance, 50.0 metres in Circle pivot
guidance).
NOTE: It is not necessary to drive the entire circumference of the
centre pivot in order to initiate Circle pivot guidance.
Use CANCEL MARK icon to cancel the Mark A command and
revert to the previous guideline (when established).
Figure 6-19: Mark A point
13:12 7.2
km/h
Mark A
A