TeeJet Matrix Pro 840GS - Manual (Page 60)

54
www.teejet.com
HOME
OVER
VIE
W
SE
TUP
IMPLEMENT
FULL SCREEN
GPS
INTR
ODUC
TION
GUID
ANCE
DR
OPLE
T MONIT
OR
Figure 7-4: GPS status information
GPS status information on guidance screens
GPS status displays information regarding data rates, number of
satellites in view, and satellite quality and ID.
1. Press GPS STATUS icon :
27.00
ha
10.0
km/h
Mark A
GGa rate: 5 Hz
VtG rate: 5 Hz
number of satellites: 10
HdOP: 1
Prn: 135
GGa quality: 2
receiver: 1
receiver version:
utM zone: 12
GGA requirements
GGA quality required to be able to work with various types of
signal can vary. See table below for requirements.
Service Indicator Accuracy
GPS only 1 <3 m
WAAS/EGNOS/Beacon 2 <1 m
RTK 4 4 cm
Omnistar HP/XP 5 10 cm
Glide/ClearPath 9 <1 m
Programming receiver
Program allows direct programming of the GPS receiver through a
command line interface. Only TeeJet support technicians should
use this feature. Use at your own risk!
1. Press
Start
.
2. Adjust programming as required.
Figure 7-5: Programming Receiver
PRN
PRN selects the SBAS PRN that will provide GNSS differential
correction data.
1. Press DOWN arrow to access the list of options.
2. Select:
►Automatic – automatic PRN selection
►Number – contact your local dealer for the number
associated with your operating location
Figure 7-6: PRN
automatic
120
121
122
123
124
125
126
127