2 using the menus, 5 basic operation, 1 setting time and date – SilentKnight 5808 User Manual
Page 130: 2 disable / enable nacs by group, 3 disable / enable a template, 4 disable / enable a zone, 5 disable / enable a point, 2 using the menus -4, Basic operation -4
System Operation
151274-L8
8-4
8.4.2
Using the Menus
8.5
Basic Operation
8.5.1
Setting Time and Date
1.
From the Main Menu, select 4 for Set Date and Time.
2.
Make changes in the fields on the screen. Use
(right arrow) to move through the fields. Use the
and
to select options in the fields.
3.
When the date and time are correct, press
ENTER
.
8.5.2
Disable / Enable NACs by Group
1.
From the Main Menu, select 2 for point functions.
2.
Select 1 for Disable/Enable Point.
3.
Select 1 to Disable NACs by group or 2 to Enable NACs by group.
4.
Use
and
to move through the list of groups. Press
ENTER
to select the group
highlighted.
8.5.3
Disable / Enable a Template
1.
From the Main Menu, select 2 for Point Functions.
2.
Select 1 for Disable/Enable Point.
3.
Select 1 to Disable NACs by Template or 2 to Enable NACs by Template.
4.
Use the
or
arrow key to select the Template and press
ENTER
.
8.5.4
Disable / Enable a Zone
1.
From the Main Menu, select 2 for Point Functions.
2.
Select
1 for Disable/Enable Point.
3.
Select 5 to Disable Zone Points or 6 to Enable Zone Points.
4.
Use the
or
arrow key to select the Zone and press
ENTER
.
8.5.5
Disable / Enable a Point
1.
From the Main Menu, select 2 for Point Functions.
2.
Select 1 for Disable/Enable Point.
To move through the menus:
Use
and
to move through the options in a menu. Use to move to a
previous menu.
To select an option:
Enter the number of the option.
–OR–
Press ENTER if the option appears at the top of the menu (= symbol displays after
the option number in this case).