SilentKnight 5808 - Manual (Page 123)

IntelliKnight 5808 Installation Manual 151274-L8
7-31
A screen similar to the one shown in Figure 7-21 will display.
Figure 7-21 Internal Banner Message
5. Press the or arrow to select “Custom”, then press ENTER .
A screen similar to the one shown in Figure 7-22 will display.
Figure 7-22 Custom Banner Edit Screen
6. Select each character of a word by pressing the or arrow, then press to move to the next charac-
ter.
7. When word or sentence is complete press ENTER to move to line two of the custom banner. Repeat step 6
and 7.
7.6.8 SLC Family
The 5808 supports the use of either SD protocol SLC devices or SK SLC devices. You must configure the 5808
to accept the protocol you are installing. You cannot mix SLC devices of different protocols.
1. Select 7 for Program Menu.
2. Press 5 for System Options.
3. Press 9 for SLC Family.
4. Press to select the desired SLC device type.
5. Press ENTER to accept the displayed SLC device type.