SilentKnight 5808 - Manual (Page 10)

IntelliKnight 5808 Installation Manual 151274-L8
1-2
1.2 About this Manual
This manual is intended to be a complete reference for all installation and operation tasks for the 5808. Please let
us know if the manual does not meet your needs in any way. We value your feedback!
1.2.1 Terms Used in this Manual
The following terminology is used with the 5808 system:
Table 1-1 Manual Terminology
Term Description
SLC Signaling Line Circuit
Module The term module is used for all hardware devices except for SLC
addressable devices and notification appliances. This includes the 5808
panel itself.
Input Point An addressable sensing device, such as a smoke or heat detector or a
contact monitor device.
Input Zone A protected area made up of input points.
Output Point
(or Output Circuit) A notification point or circuit for notification appliances. Relay circuits and
auxiliary power circuits are also considered output points.
Group (or “Output Group”) A group of output points. Operating characteristics are common to all
output points in the group.
Output (or “Cadence”) Pattern The pattern that the output will use, for example, Constant, March Code,
ANSI 3.41. Applies to zones and special system events. See Section
7.6.3.2 for additional information.
Mapping Mapping is the process of specifying which outputs are activated when
certain events occur in the system. Section 6.2 explains mapping in detail.