Reznor MAPS II Unit Installation Manual - Manual

Form I-MAPS II, P/N 206131 (Rev 13), Page 1
MAPS ® II
Model RDCA
Form I-MAPS II (Version B)
Obsoletes Form I-MAPS II (Version A)
Installation/Operation
�
Applies to: MAPS II Model Series RCA, RDA,
RDCA, RDDA, RECA, REDA, and JHUP
Modular Air Processing Systems
FOR YOUR SAFETY
If you smell gas:
• Open windows.
• Do not touch any electrical switches.
• Extinguish any open flame.
• Immediately call your gas supplier.
FOR YOUR SAFETY
The use and storage of gasoline or other flammable vapors and liquids in open
containers in the vicinity of this appliance is hazardous.
WARNING:
All MAPS ® II modular air processing systems contain either chlorodifluoromethane
(HCFC-22) or a hydro-fluorocarbon blend (HFC-407C). HCFC-22 is believed
to harm the public health and environment by destroying ozone in the
upper atmosphere. Do not release HCFC-22 to the atmosphere. The
U. S. Clean Air Act requires the recovery of any residual refrigerant.
WARNING:
Improper installation, adjustment, alteration, service, or maintenance can cause
property damage, injury, or death. Read the installation, operation, and maintenance
instructions thoroughly before installing or servicing this equipment.
®
AG
EN
CY
PROCE
SS
ST
A
R
T-
U
P
PR
ODUCT
C
U
ST
O
M
ER
WAR
RA
NT
Y
CO
NVERGENT
QU
ALITY SYSTE
M
CQS CQS
® ™