Reznor UDBS Option - Installation - Downturn Nozzles - V3 - Manual

Form RZ-NA I-V3-DN, P/N 197101 Rev 5, page 1
Applies to: Models UDAP, UDAS, UDBP, UDBS, UEAS
Installation Form for Downturn Nozzles,
Options CD2, CD3, CD4, and CD5
Form I-V3-DN (Version A.3)
Obsoletes I-V3-DN (Version A.2) ®
Downturn nozzles are designed to direct the discharge air in a more vertical flow.
These downturn nozzle packages apply only to Reznor Models UDAP, UDAS,
UDBP, UDBS and UEAS.
Models UDAP and UDAS are designed for either 2-pt or 4-pt suspension. Models
UDBP, UDBS, and UEAS are designed with 4-pt suspension. Four-point suspen-
sion is required when installing a downturn nozzle.
Downturn nozzles are available in four configurations:

Option CD2 - one nozzle section with a 25-65° range of air deflection
 Option CD4 - same as CD2 plus vertical louvers
 Option CD3 - two nozzle sections providing a 50-90° range of air deflection
 Option CD5 - same as CD3 plus vertical louvers (Install on blower Model
UDBP or UDBS only; do not install CD5 on Model UDAP, UDAS, or UEAS.)
Description and
Application
Kit Components
Models UDAP, UDAS, UDBP, UDBS 30, 45 60, 75 100, 125 150, 175, 200 225, 250 300, 350, 400
Model UEAS 130, 180 260, 310
Option CD2 Pkg P/N 197103 197104 197105 201202 201203 201204
Nozzle Section Right Side (1)196990 (1)196991 (1)196992 (1)197173 (1)197174 (1)197175
Nozzle Section Left Side (1)196993 (1)196994 (1)196995 (1)197176 (1)197177 (1)197178
Nozzle Section Top (1)196987 (1)196988 (1)196989 (1)197170 (1)197171 (1)197172
Nozzle Bracket -- -- -- (2)201708 (2)201709
Nozzle Section Bottom (1)196996 (1)196997 (1)197179
Screws (14) 195638, #8-18 x 3/8" long AB point, slotted indented serrated hex washer head
Option CD4 Pkg P/N 197114 197115 197116 201208 201209 201210
Same components as Option CD2 above PLUS
Vertical Louver
(5)196232 (5)196231 (5)196233 (8)196572 (8)196573 (8)195315
Compression Spring (5)195046 (5)195046 (5)195046 (8)195046 (8)195046 (8)195046
Louver Top and Bottom Support (2)197056 (2)197189 (2)197190
Louver Frame Side (2)197057 (2)197058 (2)197059 (2)197186 (2)197187 (2)197188
Screws (20) 195638, #8-18 x 3/8" long AB point, slotted indented serrated hex washer head
Option CD3 Pkg P/N 197111 197112 197113 201205 201206 201207
Nozzle Section Right Side (2)196990 (2)196991 (2)196992 (2)197173 (2)197174 (2)197175
Nozzle Section Left Side (2)196993 (2)196994 (2)196995 (2)197176 (2)197177 (2)197178
Nozzle Section Top (2)196987 (2)196988 (2)196989 (2)197170 (2)197171 (2)197172
Nozzle Bracket -- -- -- (2)201708 (2)201709
Nozzle Section Bottom (2)196996 (2)196997 (2)197179
Screws (28) 195638, #8-18 x 3/8" long AB point, slotted indented serrated hex washer head
Option CD5 Pkg P/N 202094 202095 202096 202097 202098 202099
Same components as Option CD3 above PLUS
Vertical Louver
(5)196232 (5)196231 (5)196233 (8)196572 (8)196573 (8)195315
Compression Spring (8)195046 (8)195046 (8)195046 (8)195046 (8)195046 (8)195046
Louver Top and Bottom Support (2)197056 (2)197189 (2)197190
Louver Frame Side (2)197057 (2)197058 (2)197059 (2)197186 (2)197187 (2)197188
Screws (22) 195638, #8-18 x 3/8" long AB point, slotted indented serrated hex washer head