Reznor RDH with 1-stage gas control or 2-stage gas control Gas Conversion Kit Instructions User Manual
Warning
![background image](/manuals/709495/1/background.png)
Form CP-PREEVA-GC, P/N 212063 R7, Page 1
Form CP-PREEVA-GC (Version A)
Obsoletes Form CP-PREEVA-GC
®
All gas conversion must be done by a qualified service person in compliance with the
National Fuel Gas Code NFPA 54 / ANSI Z223.1 (latest edition), these instructions,
and other applicable codes and requirements.
In Canada, gas conversion shall be carried out in accordance with the requirements of
the Provincial Authorities having jurisdiction and in accordance with the requirements
of the CAN/CSA-B149.1 (latest edition), Natural and Propane Gas Installation Code.
1. DANGER: Failure to comply will result in severe personal injury or death
and/or property damage.
2. WARNING: Failure to comply could result in severe personal injury or
death and/or property damage.
3. CAUTION: Failure to comply could result in minor personal injury and/or
property damage.
FOR YOUR SAFETY
— WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any phone in
your building.
• Leave the building immediately.
• Immediately call your gas supplier from a phone remote
from the building. Follow the gas supplier’s instructions.
• If you cannot reach your gas supplier, call the fire
department.
— Installation and service must be performed by a qualified
installer, service agency, or the gas supplier.
Do not store or use gasoline or other flammable vapors and liquids in
the vicinity of this or any other appliance.
Gas Conversion Kit Instructions
Applies to:
PREEVA
®
Models PDH, SDH, and RDH
with 1-Stage Gas Control Option AG1 or with 2-Stage
Gas Control Options AG2, AG3, AG15, and AG16
General and
Warnings
HAZARD INTENSITY
LEVELS of Warnings
in this Manual
WARNING
Improper installation, adjustment, alteration, service,
or maintenance can cause property damage, injury, or
death. Read the installation, operation and maintenance
instructions thoroughly before installing or servicing this
equipment.
WARNING
The conversion kit is to be selected and installed by a qualified service person
in accordance with these instructions and in compliance with all codes and
requirements of authorities having jurisdiction. Failure to follow instructions
could result in death, serious injury and/or property damage. The qualified agency
performing this work assumes responsibility for this conversion.