4 urom_movedp1, 5 urom_movedp1inc, 6 urom_movedp1dec – Maxim Integrated MAXQ Family Users Guide: MAXQ8913 Supplement User Manual
Page 104: Maxq family user’s guide: maxq8913 supplement
MAXQ Family User’s Guide:
MAXQ8913 Supplement
25-5
25.3.4 UROM_moveDP1
Notes:
• Before calling this function, DPC should be set appropriately to configure DP[1] for byte or word mode.
• The address passed to this function should be based on the data memory mapping for the utility ROM, as shown
in Figure 25-1. When a byte mode address is used, CDA0 must be set appropriately to access either the upper or
lower half of program flash/ROM memory.
• This function automatically refreshes the data pointer before reading the byte/word value.
25.3.5 UROM_moveDP1inc
Notes:
• Before calling this function, DPC should be set appropriately to configure DP[1] for byte or word mode.
• The address passed to this function should be based on the data memory mapping for the utility ROM, as shown
in Figure 25-1. When a byte mode address is used, CDA0 must be set appropriately to access either the upper or
lower half of program flash/ROM memory.
• This function automatically refreshes the data pointer before reading the byte/word value.
25.3.6 UROM_moveDP1dec
Notes:
• Before calling this function, DPC should be set appropriately to configure DP[1] for byte or word mode.
• The address passed to this function should be based on the data memory mapping for the utility ROM, as shown
in Figure 25-1. When a byte mode address is used, CDA0 must be set appropriately to access either the upper or
lower half of program flash/ROM memory.
• This function automatically refreshes the data pointer before reading the byte/word value.
Function:
UROM_moveDP1
Summary:
Reads the byte/word value pointed to by DP[1].
Inputs:
DP[1]: Address to read from.
Outputs:
GR: Data byte/word read.
Destroys:
None.
Function:
UROM_moveDP1inc
Summary:
Reads the byte/word value pointed to by DP[1], then increments DP[1].
Inputs:
DP[1]: Address to read from.
Outputs:
GR: Data byte/word read.
DP[1] is incremented.
Destroys:
None.
Function:
UROM_moveDP1dec
Summary:
Reads the byte/word value pointed to by DP[1], then decrements DP[1].
Inputs:
DP[1]: Address to read from.
Outputs:
GR: Data byte/word read.
DP[1] is decremented.
Destroys:
None.
Maxim Integrated