Interlogix NVR 50 User Manual User Manual
Page 78

8BChapter 9: Using the web browser
72
TruVision NVR 50 User Manual
Menu
Function
Description
information.
Recording schedule
Define the recording schedules. See “Defining a
recording schedule” on page 84 for more
information.
Motion detection
Define motion detection parameters. See “Setting
up motion detection” on page 92 for more
information.
Privacy mask
Define the on-screen privacy mask areas. See
“Setting up privacy masking” on page 118 for
more information.
Tamper-proof
Define the video tampering detection settings.
See “Detecting video tampering” on page 98 for
more information.
Video loss
Define the video loss detection settings. See
“Detecting video loss” on page 97 for more
information.
Text overlay
Add extra lines of text on screen. See “Text
overlay” on page 78 for more information.
Network settings
General
Define the general network settings. See
“Configuring general network settings” on page
99 for more information.
PPPoE
Define the PPPoE settings. See “Configuring
PPPoE” on page 101 for more information.
DDNS
Define the DDNS settings. See “Configuring
DDNS” on page 101 for more information.
Define the settings to send an e-mail. See
“Configuring e-mail” on page 103 for more
information.
NetHDD
Define the remote storage system for NVR
recordings. See “Using a network storage
system” on page 78 for more information.
SNMP
Define the SNMP settings. See “Configuring
SNMP” on page 103 for more information.
FTP
This function is currently unavailable.
More settings
Define a remote alarm host, multicast IP as well
as the server, HTTP, and RTSP ports. See page
105 for more information.
Serial port settings 232 serial port
Define the RS-232 parameters. See “Configuring
the RS-232 port” on page 121 for more
information.
485 serial port
Define the RS-485 parameters.
Alarm settings
Alarm input
Define the alarm input parameters for when an
external alarm is triggered. See “Setting up
external alarms” on page 94 for more information.
Alarm output
Define the response when an external alarm is
triggered. See “Setting up external alarms” on
page 94 for more information.