Interlogix NVR 50 User Manual - Manual (Page 48)

5BChapter 6: Controlling a PTZ camera
42 TruVision NVR 50 User Manual
Figure 20: PTZ control panel
Table 14: Description of the PTZ control panel
Item Name Description
1. Directional pad/auto-
scan buttons Controls the movements and directions of the PTZ. Center button
is used to start auto-pan by the PTZ dome camera.
2. Zoom, focus and iris Adjusts zoom, focus and iris.
3. PTZ movement Adjusts the speed of PTZ movement.
4. Toolbar Turns on/off camera light. This command is not
supported on all PTZ cameras.
Turns on/off camera wiper. This command is not
supported on all PTZ cameras.
Zoom area.
Centers the PTZ dome camera image. Not all PTZ
cameras support this command.
Jumps to the home position.
5. Select PTZ command Displays the desired function from the scroll bar: camera, preset,
preset tour or shadow tour.
6. Open/close menu Opens/closes the PTZ command section of the PTZ control
panel.
7. Exit Exits the PTZ control panel.
Setting and calling up presets
Presets are previously defined locations of a PTZ dome camera. It allows you to
quickly move the PTZ dome camera to a desired position. They are configured
and modified from the PTZ configuration window (see Figure 21 below).