Interlogix NVR 50 User Manual - Manual (Page 42)

4BChapter 5: Live view
36 TruVision NVR 50 User Manual
Note: “X” means that the camera is not displayed.
7. Click Apply to save the settings.
8. Click Back to return to live view.
General settings
Use this screen to configure the monitor image, GUI language, login password
requirement, monitor resolution as well as to configure the NVR name and
address. See Figure 17 below.
The TVN 50 can support NTSC or PAL video output. The video format is auto
detected.
The changes are immediately implemented once Apply is clicked to save the
settings.
Figure 17: Monitor setup screen: General Settings
Table 11: Description of the Monitor setup screen: General Settings
Option Description
Language Change the language of the system.
Select the desired language from the drop-down list and click
Apply . The language displayed changes immediately.
Device name Define the NVR name. The default name is TVN50.
Click the edit box and enter the new name from the soft keyboard.
Device address The device number to use for the NVR when programming the
remote control or keypad. The default value is 255.
Zone ID Each TVN in a daisy chain must have a unique zone ID so that it
can be controlled by a KTD-405.
The default value is 1.