Tvn 50 and keypad functions – Interlogix NVR 50 User Manual User Manual
Page 151

20BAppendix D:
KTD-405 keypad
TruVision NVR 50 User Manual
145
5. To connect it to the NVR, press the
zone
button and enter the ID number of
the TVN 50. The default value is “1”.
6. To configure the NVR zone ID number, at the NVR enter the Monitor screen
by selecting
Display Mode Settings
in the main menu and select
Monitor
.
Under Zone ID, enter the zone ID value. The default value is “1”.
Note: The zone ID value must be identical for the NVR and keypad.
The TVN 50 is now connected to the KTD-405 keypad.
TVN 50 and keypad functions
The KTD-405U acts as a NVR control keypad when connected to the TVN 50.
The keypad mimics many of the functions available from the front panel of the
TVN 50.
Unavailable TVN 50 functions
The following TVN 50 functions are unavailable when using the keypad to control
the TVN 50:
Export video
Shadow tour
Select motion detection or tampering zones
Archive records
Capture video
If these functions are required, it is recommended to use a mouse in conjunction
with the keypad as all TVN 50 functions will then be available.
Unavailable keypad functions
The following keypad buttons are unavailable when using the keypad to control
the TVN 50: