Interlogix NVR 50 User Manual - Manual (Page 24)

3BChapter 4: Operating instructions
18 TruVision NVR 50 User Manual
Figure 7: Front panel
The controls on the front panel include:
Table 2: Front Panel Elements
Item Name Description
1. Status LEDs Power: Green indicates the NVR is working correctly.
Red indicates a fault.
Alarm: Red indicates there is an Alarm In or other
alarms such as motion detection or tampering.
Tx/Rx: Green indicates normal network connection.
HDD: HDD indicator blinks red when data is being read
from or written to the HDD.
Ready: Green indicates the device is functioning
properly.
Archive: Archive indicator blinks green when record
files or snapshots are being exported to a USB or
eSATA device.
2. IR receiver Receiver for IR remote.
3. Front Panel Lock You can lock or unlock the front panel with a key.
4. Display buttons Display: Toggles through the various multiviews: full,
quad, 1+5, 1+7, 9, and 16.
Sequence: Starts/stops sequencing in live view mode.
A: Selects monitor VGA/A in live view mode
B: Selects monitor A/B in live view mode
F1: In all-day playback, click to start and stop video
clipping.
F2: In live view mode, click to display/hide the time bar.
In all-day playback, click to hide/display the playback
control toolbar.
5. Numeric buttons Switch between different cameras in live, PTZ control or
playback modes.
6. USB Interfaces Universal Serial Bus (USB) ports for additional devices
such as a USB mouse and USB Hard Disk Drive (HDD).