Exporting network packet data – Interlogix NVR 50 User Manual User Manual
Page 112
11BChapter 12: Network settings
106
TruVision NVR 50 User Manual
To check network delay and packet loss:
1. Click the
System Settings
icon in the menu toolbar and then click
Net
detect
.
2. Select the
Network Detection
tab.
3. Under the section “Network delay, Packet loss test”, enter the destination
address and click
Test
.
The test result appears in a pop-up screen.
4. If you need to check the current network parameters, click the
Network
button to get an overview.
To check network statistics:
1. Click the
System settings
icon in the menu toolbar and then click
Net
detect
.
2. Select the
Network Stat.
tab.
3. The latest information is displayed on the bandwidth used by remote live and
playback as well by Net Receive Idle and Net Send Idle. Click
Refresh
to
update the information.
Exporting network packet data
When the NVR is connected to a network, you can export the captured data
packet to a USB-flash disk, SATA/eSATA CD-RW and other local backup
devices.