Configuring e-mail, Configuring snmp – Interlogix NVR 50 User Manual User Manual
Page 109
11BChapter 12: Network settings
TruVision NVR 50 User Manual
103
Configuring e-mail
Your NVR can send e-mail notifications of alarms or notifications through the
network.
Note:
Ensure that the DNS address has been set up correctly beforehand.
To configure e-mail settings:
1. Click the
Network Settings
icon in the menu toolbar.
2. Click
and enter the required settings.
Option
Description
Enable server
authentication
Check the box if your mail server requires authentication and
enter the login user name and password.
SMTP server
Enter the SMTP server’s IP address.
SMTP port
Enter the SMTP port. The default TCP/IP port for SMTP is 25.
Enable SSL
Check the box to enable SSL if it is required by the SMTP
server. This feature is optional.
Sender
Enter the name of the sender of the e-mail.
Sender’s address
Enter the sender’s e-mail address.
Select receivers
Select an e-mail recipient. Up to three receivers can be selected.
Receiver
Enter the name of the receiver of the e-mail.
Receiver’s address
Enter the e-mail address of the receiver.
Enable Attached Picture
Check the Enable Attached Picture box if you want to send an e-
mail with attached alarm images.
Interval
Select an interval range in the Interval box.
The interval range represents the time range between the alarm
images being sent. For example, if you set the interval range at
two seconds, the second alarm image will be sent two seconds
after the first alarm image.
3. Click
Test
to the test e-mail settings.
Note:
We recommend that you test the e-mail settings after entering values in
the e-mail window.
4. Click
Apply
to save the settings.
Configuring SNMP
SNMP is a protocol for managing devices on networks. When you enable SNMP
in the menu, network management systems can retrieve NVR status information
from the NVR via SNMP.
When you set the trap address and trap port in the NVR menu to the network
management system’s IP address and port number, and set up the network
management system as trap receiver, trap notifications (such as startup) are sent