Interlogix NVR 50 User Manual - Manual (Page 77)

8BChapter 9: Using the web browser
TruVision NVR 50 User Manual 71
Figure 29: Remote browser configuration screen (Display Settings window shown)
Table 17: Description of remote configuration menus
Menu Function Description
Device parameters Device information Device name: Define the NVR name. The default
name is TVN 21.
Device number: The device number to use for the
NVR when programming the remote control. The
default value is 255.
Zone ID: Each NVR in a daisy chain must have a
unique zone ID so that it can be controlled by a
KTD-405. The default value is 1.
Overwrite: Enable or disable. Enabling this
setting causes recorded files to be overwritten
once the HDD is full.
eSATA: Define how an external recording device
saves records. See “Using an external recording
device” on page 83 for more information.
Event priority: Define the priority between text
insertion event and motion alarm if both are
triggered at the same time. Default is Motion
alarm (Text In < Motion).
Time settings Define time and date. See “Configuring time and
date” on page 38 for more information. See
“Configuring an NTP server” on page 102 for
information on setting up NTP time settings.
Holiday settings Define how recordings occur during holiday
periods. See “Holiday schedules” on page 86 for
more information.
Camera settings Display settings Define which information is displayed on-screen.
See ““Configuring the camera OSD settings” on
page 117 on page 115 for more information.
Video settings Define general recording settings. See “Defining
a recording schedule” on page 84 for more