Interlogix NVR 50 User Manual - Manual (Page 49)

5BChapter 6: Controlling a PTZ camera
TruVision NVR 50 User Manual 43
Note: The PTZ dome camera used must be able to support a preset command.
See Appendix F on page 153 for the complete list of PTZ commands available by
camera protocol.
Figure 21: PTZ configuration window
Table 15: Description of the PTZ configuration window
Item Name Description
1. Save preset Saves preset.
2. Call preset Calls up pre-existing preset.
3. Shadow tour toolbar Starts recording the shadow tour.
Saves the shadow tour.
Starts the selected shadow tour.
Stops the selected shadow tour.
4. Preset tour toolbar Adds a step to a selected preset tour.
Starts the selected preset tour.
Stops the selected preset tour.
Deletes all the preset tour steps.
Scrolls up the list.
Scrolls down the list.