Interlogix NVR 50 User Manual - Manual (Page 35)

4BChapter 5: Live view
TruVision NVR 50 User Manual 29
Figure 11: The mouse menu for the main monitor
The list of commands available depends on which monitor is active; main or spot
(monitor B). See Table 7 below. The default settings of these commands are
provided in Appendix G, “Default menu settings” on page 153.
Table 7: Mouse menu for monitor A (main monitor)
Item Name Description
1. Menu Enter the Main menu.
This option is not available from monitor B.
2. Single camera Switch to a full-screen view for the selected camera from
the dropdown list.
3. Multi camera Switch between the different multiview options from the
dropdown list.
4. Previous screen Displays the previous camera.
5. Next screen Displays the next camera.
6. Start auto-switch Turn on sequence mode. The screen automatically
sequences between cameras. See “Viewing in multiview”
on page 30.
Go to Menu > Display Mode Settings > Layout > Dwell Time
to set up.
7. All-day playback Playback the recorded video of the selected day from the
selected camera. The current day is selected by default.
See “All-day playback” on page 53 for more information.
8. Monitor B Switch between monitors A (main) and B (spot).
9. Advanced search Enter the advanced video search menu. See “Searching
recorded video” on page 54 for more information.
10. Close timebar Open/close the time bar.
Note: When the monitor B is active, the main monitor commands are
unavailable.