KEYENCE SL-R12EX - Manual (Page 70)

Chapter 5 Checklist
5-2
English ENGLISH
5
5-2 List of maintenance check items
Use the following checklist to confirm proper system operation before starting a day’s operation.
The following checklist contains the minimum necessary items for using the SL-R12EX. The required check
items will differ depending on the laws, ordinances, regulation and other requirements of the country and
region where the SL-R12EX is being used, as well as with the machine onto which they are installed.
Therefore, KEYENCE strongly recommends that the responsible personnel add any required check items to
this checklist.
In addition, note that it is the duty of the responsible personnel to train the machine operators with sufficient
instruction regarding maintenance of the machine, the SL-C Series, the SL-R11, and the SL-R12EX.
The result of this inspection must be kept on record along with the machine log.
This checklist is only to be used for the SL-R12EX, so refer to the SL-C Series and SL-R11 instruction
manuals to create a checklist based on using the SL-R12EX in combination with the SL-C Series and the SL-
R11.
❏
The brightness (luminance) of the muting lamp(s) is not diminished due to dirt or aging.
❏
It is confirmed that the intended functions are set, such as muting, blanking, and other functions.
❏
If the BBP unit creates a new hazardous zone allowing human approach, additional safety
protective equipment such as a safe guard is installed for that zone. This additional safety protec-
tive equipment keeps normal operation.
05_R12EX_E.p65 14.9.10, 5:35 PM 2