KEYENCE SL-R12EX - Manual (Page 12)

Chapter 1 Specifications
1-4
1
English ENGLISH
Material Zinc die-cast
Polycarbonate
-10 to +55 °C (No frost)
-10 to +60 °C (No frost)
35 to 85% RH (No condensation)
35 to 95% RH
White incandescent lamp: 5,000 rx or less Sunlight: 20,000rx or less
10 to 55 Hz, 0.7 mm (0.03") compound amplitude, 20 sweeps each in X, Y, and Z directions
100 m/s 2 (Approx. 10G) 16ms pulse, in X, Y, Z directions 1,000 times each axis
Aluminum
Model
Detection zone
Beam axis interval
Operating distance
Detection capability
Effective Aperture Angle
Response time
Power supply
Light source
Operation form
Current consumption
SL-C08SB, SL-C16SB
Depends on sensors used.
Beam axis interval: 20 mm (0.79"), Lens diameter: 5.0 mm (0.2")
0.3 to 9 m (0.98 to 29.53 ft.) *Limited by operating distance of sensors used.
ø 25mm (0.98")
Max. ±2.5° (When operating distance is at least 3 m (9.84 ft.))
24 ms (including sensor and SL-R11 response speed)
Supplied from SL-R12EX
Transmitter: Max. 50 mA (24 V DC)
Receiver: Max. 50 mA (24 V DC)
Infrared LED (850 nm)
Turns on when light is received from all light beams (except when
the blanking function is used)
IP65 (IEC60529)
Environmental
specifications
Protective structure
Ambient temperature
Storage ambient temperature
Relative humidity
Ambient light
Vibration
Shock
Main unit case
Upper case/Lower case
Overlay
Storage ambient humidity
Weight
SL-C08SB: Transmitter approx. 165 g, Receiver approx. 180 g
SL-C16SB: Transmitter approx. 255 g, Receiver approx. 280 g
Approved
standards
Material
Weight Approx. 60 g (excluding cables)
-10 to +55 °C (No frost)
-10 to +60 °C (No frost)
35 to 85% RH (No condensation)
35 to 95% RH
10 to 55 Hz, 0.7 mm (0.03") compound amplitude, 20 sweeps
each in X, Y, and Z directions
100 m/s 2 (Approx. 10G) 16ms pulse, in X, Y, Z directions 1,000 times each axis
Polycarbonate
UL61496-1
FCC Part15B Class A
UL61496-1
UL508
Model
Power supply
MUTE lamp brightness Min.
Area
SL-R12D
Supplied from SL-R12EX
Min. 200 cd/m 2
3 cm 2
IP65 (IEC60529) Applies to display only when mounted so device
is embedded in a panel.
Environmental
specifications
Protective structure
Ambient temperature
Storage ambient temperature
Relative humidity
Vibration
Shock
Storage ambient humidity
EMC
Safety
EMI
EMS