Checkline TI-MINIMAX - Manual (Page 92)

Dakota Ultrasonics
86
3) Press the LEFT & RIGHT arrow keys to scroll the quantity until ELONG
is displayed.
3) Press the MENU key multiple times to tab right, and the ESC key
multiple times to tab left, until the MATL menu is highlighted and
displaying the submenu items.
4) Use the UP and DOWN arrow keys to scroll through the sub menu items
until TYPE is highlighted.
4) Press the ENTER key to display the list of bolt material types.
5) Press the UP and DOWN arrow keys to scroll through the material list
until the appropriate material type is highlighted.
Note: If the material type is not in the list of types, select a similar type.
This step is only to get the velocity value in a close proximity – not critical.
Write down the velocity of the material type selected. This will be
considered the Current Velocity.
6) Press the ENTER key to display the confirmation screen.
7) Press the OK key to select the type and return to the menu screen, or
ESC to cancel selecting the material type.