Selecting the number of readings per bolt – Checkline TI-MINIMAX User Manual

Page 110

Dakota Ultrasonics

104

1) Use the

UP and DOWN arrow keys to scroll through the new Group

List Items until NUM BOLTS is highlighted.

2) Press the

ENTER key to display the Digits Edit Box.

3) Press the

UP and DOWN arrow keys to scroll the highlighted value.

4) Press the

LEFT and RIGHT arrow keys to scroll the digit locations.

5) Repeat steps

3 & 4 until the NUM BOLTS value is correctly displayed.

6) Press the

OK key to save the NUM BOLTS and return to the Group

List Items menu, or ESC to cancel entering the NUM BOLTS.

Selecting the Number of Readings Per Bolt

Note: In this example 3 loads will be applied to each sample bolt.