Checkline TI-MVX - Manual

TABLE OF CONTENTS
CHAPTER ONE: INTRODUCTION ..............................................................................2
CHAPTER TWO: QUICK STARTUP GUIDE ................................................................3
CHAPTER THREE: KEYBOARD, MENU, & CONNECTOR REFERENCE................12
CHAPTER FOUR: PRINCIPALS OF ULTRASONIC MEASUREMENT......................23
CHAPTER FIVE: SELECTING THE MEASUREMENT MODE ..................................26
CHAPTER SIX: MAKING MEASUREMENTS ............................................................29
CHAPTER SEVEN: USING THE A-SCAN & B-SCAN DISPLAYS .............................37
CHAPTER EIGHT: THRU PAINT MEASUREMENT TECHNIQUE.............................55
CHAPTER NINE: ADDITIONAL FEATURES OF THE MVX.......................................58
CHAPTER TEN: DATA STORAGE – SETUP, EDIT, & VIEW GRIDS .........................64
CHAPTER ELEVEN: SETUPS – CREATE, STORE, EDIT, & RECALL .....................74
CHAPTER TWELVE: USING THE UTILITY SOFTWARE ..........................................78
APPENDIX A: VELOCITY TABLE ...............................................................................79
APPENDIX B: SETUP LIBRARY ................................................................................80
-1-
APPENDIX B: SETUP LIBRARY
Num Name Comment 1 Gn/AGC Velocity
1 STEEL BASIC 45 0.2330 in/µSec
2 STEEL THRU PNT STD _ 5MHZ HD 15 0.2330 in/µSec
3 STEEL THRU PNT EXT _ 3MHZ HD 14 0.2330 in/µSec
4 ALUMINUM W/GATE _7.5MHZ 45 0.2510 in/µSec
5 PLASTIC W/GATE THK _ 1MHZ CPZT 45 0.0940 in/uSec
6 PLASTIC BASIC _ 2.25MHZ 45 0.0940 in/µSec
-80-